Broken Tactiles
Bhavin Ghelani
  • Tactile Indicators
  • 1, 07, 2020

People with vision impairments may find it more difficult to navigate public settings safely since they are unfamiliar with the obstacles that may be in their way.

Tactile Ground Surface Indicators (TGSIs) are tools that help visually impaired individuals safely and quickly navigate public environments. TGSIs operate by allowing people to see patterns so that they can become familiar with these places and navigate a path that is comfortable for them.

TGSIs are mostly employed in ‘risk’ areas such as transport hubs and warehouses, railway stations, bus stops, rail stops, and depots, all of which can be hazardous for blind individuals to travel. Curbs, steps, platform edges, and other barriers are typically difficult to navigate, and the increased crowds and noise will only make things more difficult. If a visually impaired person makes a mistake while navigating through these locations, they may suffer injuries or worse.

Tactile Indicators Installation Errors TGSIs assist those with visual impairments in moving through environments more effectively and confidently by giving direction and alerting them to any potential risks or obstructions in their way. Having bright points on the ground can assist those with visual problems in navigating the area. Tactile indicators are also used to provide sensory detection to the blind through their feet.

When it comes to placing tactile indications, compliance is crucial since it ensures that visually impaired people receive consistent information about their surroundings.

Incorrect installation or maintenance endangers people’s lives while also exposing a company to plenty of legal and financial penalties related to OH& amp’S and disability discrimination.

Tactile indicators must be utilized consistently to ensure that persons who are visually impaired have safe and dignified access to buildings and public places, as well as to promote public safety. People will be able to get around independently if they know when to expect a hazard or which direction to travel in.

TGSIs can increase safety and accessibility when properly put and used. However, various factors can act as a threat to the visually impaired :

Installing Many TGSIĀ 

Although it may appear that having more tiles makes surfaces safer, this is not always the case. Tiles that are either too many or too large can generate confusion in terms of travel direction. This could direct people to potentially harmful regions.

A huge proportion of tiles also indicates a huge section of uneven surface, which is dangerous for pedestrians and those using mobility aids like wheelchairs or walkers. According to regulatory regulations, warning tiles must stretch at a minimum of 600 mm mostly in direction of traffic.

Installing Less TGSI

Installing less tactile The purpose of detectable warning items is to provide sufficient prior information of anticipated surface changes or potentially dangerous zones. If there are too few tiles, the user will not receive the essential warning, offering a significant risk of damage or hazard.

The regulatory standards mandate that warning tiles be installed throughout the whole width of transit platforms, blended transitions, stair landings, and curb ramps.

We can even use Truncated Domes and Navigational Bars for the same purpose.

Truncated domes and navigation bars provide non-visual hints. Each of these, on the other hand, achieves it in a different but equally useful way.

Visually challenged users can be alerted to potential threats by using truncated domes, which allows them to approach with caution. As a result, they must be placed at the beginning and end of routes.

Wayfinding bars can help visually impaired people navigate large, open spaces. They indicate the start of a path that the user should take.

Each of these alternatives should be used in combination with the others, but never at the same time.

Installation Errors

When detectable warning surfaces are effectively applied, the speed, flow, and security of pedestrian foot traffic are all improved. Truncated domes that aren’t put near enough to the ground, for example, may block foot mobility while also providing a tripping hazard.

If domes are placed on ground level, they will not provide enough warning of approaching risks, making it more difficult for people who use mobility aids like walkers and wheelchairs to go about.

All of these things can lead to expensive tile damage. Fortunately, adhering to the exacting criteria for cast-in-place tile spacing and size may assure appropriate installation and safe travel.

Installing in Inappropriate Locations

On railway platforms, pedestrian crossings, and other public areas, the placement of detectable warning tiles is mandated by law. Failure to place them in specified locations increases the risk of harm and liability, as well as the possibility of criminal penalties.

It’s just as dangerous to place tactile warning indicators in inconvenient locations. When a visually challenged person sees caution tiles on a middle instead of the start and end of a pedestrian crossing, they may assume they’ve arrived at safety when they’ve arrived at an extremely dangerous location.

The adequate and secure installation of tiles is addressed in national and local building codes, which should be followed to safeguard the security of the visually impaired.

Eminent Tactile is dedicated to providing you with the highest quality tactile products.

At Eminent Tactiles, we strive to provide our customers with the greatest quality tactile products possible. The efficiency of a tactile indicator is governed by several factors, including slip resistance, UV stability/colorfastness, durability, and installation integrity (where and how they are installed).


Don’t worry if you don’t find what you’re looking for; you can always contact us. With Us, you can trust that your project will follow all industry standards and requirements, allowing you to get it correctly the first time which will save your time and money.

We manufacture, distribute, and install tactile indicators for the blind. We offer professional services ranging from Planning & Consultation to Post Installation Services. In addition to our extensive variety of industry-approved Tactile Ground Surface Indicators (TGSIs) to assist you with the proper design and arrangement of Tactiles in your premises.

Share This Article
Bhavin Ghelani
July 1,2020

Mr. Bhavin Ghelani is an engineer and entrepreneur passed his engineering from Visvesvaraya Technological University (VTU). Since his adolescence, he has believed in society’s upbringing, and he has always desired to offer some value to society. He also has a religious side too. When in 2015, Our Prime Minister Mr. Narendra Modi started the Accessible India Campaign, also known as the Sugamya Bharat Abhiyan for all the disabled peoples in our country. He saw this initiative as a fantastic opportunity and after lots of deep research, he found the concept of Tactile Ground Surface Indicators which was being already practiced for Visually impaired peoples in countries like, Japan, Australia, New Zealand, Canada, United States of America, and many other developed countries. So at that point, the idea of the formation of ‘Eminent Tactiles’ under ‘Eminent Overseas’ came into his mind. Slowly & Steadily it has become India’s first and foremost manufacturer, supplier & exporter of Tactile Ground Surface Indicator products and under his vision, more range of products kept on developing so far.

Read More
Request your free
offer now at
Call us: +91 99981 99968

Our Clients

Skip to content